Happy New Year

Happy New Year

A post to say Happy New Year to you all and thanks for visiting this site. I hope it’s given you some pleasure. I’ve enjoyed writing it and getting the occasional comment back from some of you. It has brought some new friendships and rekindled one or two old ones. Nowadays, more than any other time in my life, I am appreciating that gift of friendship. I don’t want this to sound like some sort of sermon or lecture but because I consider you all to be my friends to some degree or other, I’d like to offer you a little comfort if possible.

You know, there’s a lot of craziness going on in the world today, the likes of which we haven’t seen before. It can make us feel quite insecure and wonder where the hell it’s leading to. The trouble is, there’s virtually nothing we can do to avoid it or improve it. We can’t make changes on a global or national scale, we have to leave that to the madmen who are in charge. That’s the scary bit, and feeling powerless. But we can change our own little worlds. We do have the power to do that to some extent. So that’s my bit of advice to you all. We can try to make our immediate environment a place where we can feel more at ease. We can offer some comfort and support to those we meet during our daily lives.

I am constantly puzzled as to why anyone should want suffering of any kind to continue in the world. Why would anyone choose war, pain, fear and anguish over peace, love, comfort and happiness? We can have the latter just as easy as we can have the former. I had one of my moments of inspiration the other day. I was thinking about all the badness that goes on in the world and trying to understand where it comes from. I’d say it mostly comes from greed and selfishness. That’s why countries fight each other, why arguments start, why people steal from others. Then I tried to think of the solution. That’s when it came to me. It’s so simple and here it is. Just be nice. How difficult is that? We all have the choice of being nasty or nice. Nobody can force us to be mean, lying, violent or greedy. If everyone just behaved in the way that they would like others to treat them, we’d have it cracked in no time. There are enough resources in the world for everyone to have a decent life, if governments and world leaders co-operated and looked after each other.

OK I’m deluded if I think I’ve solved the world’s problems here but it really could be that simple if only everyone could embrace the principle. That’s the problem though. For some reason, many people seem incapable. Well here’s my slant on what we can do. Firstly, try to embrace those nice principles ourselves as much as we can. There are many good people out there who already do. In fact I believe there are more forces for good than bad but unfortunately, many of the people in positions of power don’t practise it enough. We can always do a bit more though can’t we.

Secondly, have a little courage and empower yourself – make your personal world one you can enjoy. Don’t be afraid to be yourself, follow your dreams, talk to a stranger, put a coin in a busker’s hat, sing out loud, say sorry when you know you’re wrong. Take time to visit an old friend or make new ones, take up a new hobby or learn a new skill, grow some fruit or flowers, or just sit quietly and listen to the birds sing and feel the sun on your face. Don’t be afraid to try something new because you think you’ll be no good at it or someone will disapprove. I can’t remember which rock star said ‘no-one gets out of here alive’ but it’s a great line and also true. The point I’m making is - it’s these small things that add quality to our lives and to those of others. The warmongers and governments can’t take those away from us. This is the world we can create for ourselves whenever we wish to.

Sorry for the rant. It started out as a short post to wish you the best for the new year but I got carried away. Take care, have fun.

Merry Christmas

Just a short post to say a Merry Christmas to everyone. Thanks for visiting my blog. I'm still going strong with this stuff. The new cigarbox nation website that Shane Speal set up is brilliant. Go find it. Have a great holiday. Best wishes

David (aka smojo)

some cigar box guitar news

There are a few things to tell you about today. I've had a number of people asking about how to build a c.b. amp. I've been putting a small booklet together for a while now and just about finished it. It's going to be available at a very reasonable price. I need to do some work on a new site first before I offer it out. The site is called Folksy and it's a UK site catering for all manner of craft items. It doesn't have an image that fits well with CBGs but it will allow me to put items up for sale and take payment via Paypal. I'll post here when it's up.

I'm having a go at selling a guitar on Ebay. I've gone off Ebay recently as they seem to have got greedy and the hefty fees they take when you sell along with Paypal fees, eats into your sales. I tried a couple of CBGs there before and although there were plenty of watchers, they didn't sell. I noticed there have been a few UK CBGs sold there lately, so it might be a good time to try again. I've put my Quality Street tin guitar on. It has a nice natural reverb sound to it. It has the usual piezo pickup so you can amp it up. I've started the price at £35 which is about half of what I normally sell CBGs for so if you're interested, have a look here and you might grab yourself a nice little bargain. http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&ssPageName=STRK:MESELX:IT&item=260331120035
Sorry to say this though - I am only shipping to the UK at present. The complications, cost and risks of shipping abroad are still too much for my brain to cope with at present. I will get my head around it one day but too much to think about at the moment.

I have a few unfinished CBG projects that you have seen on here in the past. I really need to knuckle down and get them done. I seem to have difficulty in focussing my attention on them for some reason. Too many 'irons in the fire' is my problem but it niggles me that I have all these half-finished things. They'll all be really cool when I have them made so I'm going to concentrate on them this winter. I've started work again on the GPO tin amplifier. The screw-lid-used-as-a-volume control idea has been the stumbling block but I think I have it sussed now. I also restarted the big case that will hold two CBGs and a built-in amp. Lot's to do on that yet though.

Finally I just found out Shane Speal has set up a new Myspace/Facebook type of site called Cigarbox Nation. Had a brief look and it looks really cool. Lots of stuff to help the CBG builders and players. You may know Shane as the self proclaimed 'King of the Cigarbox Guitar' who set up the Yahoo CBG Forum some years ago. He made a sudden exit from the CBG scene earlier this year due to various pressures but seems to have bounced back now.

more cigar box guitar basics - slide playing

This is aimed at beginners who may have never played slide guitar or a three-stringed CBG. Now you have your guitar tuned up correctly you need to get the feel of playing slide.

It's amazing how many beginners think you have to press the strings down onto the fretboard with the slide. No no no, think about it. The slide is taking the place of the fret wires. The pitch or note played on a string gets higher as it gets shorter. The normal fret wires act in the same way as the nut at the top of the neck. They create a solid point on the string, along with the bridge, to allow the string to vibrate. The slide is simply a movable nut allowing you to shorten the string length in variable degrees rather than fixed ones like the fretwires. You only need to put enough pressure on the string to get a clear note when plucked. You also need to place the slide smack over the fret mark - not between frets or on the dots.

So first practise doing that on just the top (first) string. I prefer the slide on my little (pinky) finger as it leaves the best three fingers free. If you want to play slide on a conventional guitar, you'll appreciate having them free for occasional fretted notes. So just try placing the slide over the third fret position on the first string and pluck it. Does it rattle? Not enough pressure, put slightly more on until it rings out clear.

The most important thing you need to develop is hitting the note accurately when sliding up or down to it. You can only tell by using your ears. Unless you are tone-deaf you will know when it's right. So try putting your slide over the third fret, pluck the string and while it's still ringing, slide smoothly up to the fifth fret. Does it sound right? Yep - you just learned your first lick. Now try adding some vibrato when you reach the fifth fret. Using movement in the wrist, simply 'wobble' the slide back and forth slightly above and below the fret position. That sounds much better doesn't it. Try these exercises, sliding from frets 2-3, 3-5, 5-7, 7-10, 10-12 then try them in reverse. Don't forget to practise the vibrato on the targeted frets.

More tips to follow soon.

some cigar box guitar basics - tuning

I Just thought it was time to go back to a few basics. I've probably said these things before in older posts but it's worth mentioning again for any newbie CBGers. All my guitars so far, have been made specifically for slide playing so they don't have fretwires. They just have markings as a guide, so all these comments relate specifiaclly to slide guitars and playing them.

First let's look at tuning. The bridges on most of my guitars are 'floating'. In other words they aren't glued or fixed to the body. That allows them to have fine adjustments made to the 'intonation', which is the first thing we need to check. Play a note on an open string (I usually start with the 1st). Listen to it carefully then place your slide directly over the 12th fret position and play that string again. It should be exactly an octave above the open note. You'll find it easier to get this accurate if you use a narrow metal rod such as the shaft of a screwdriver. If it's not correct, then move the bridge back or forward slightly until it is. De-tensioning the strings a little will take pressure off it and make it easier to move. If you have to change the strings, it's easier if you do one at a time. That way the bridge will stay where it is and avoid you having to do this each time.

Now to tune up - I normally tune to an open chord such as E, A or D. You can't change the tunings very far by winding the machine heads up or down so if it's currently in low open E and you want it in A, you need lighter strings. You need to make sure the tension on them is right. So how do you know what to use, this is how I do it and it works well. Think about standard tunings EADGBE. Now think about the popular open D tuning on a six-string - DADF#AD. Now if I wanted the guitar in low open E and only have three strings I would tune it to (low)EBE. Look at the standard tuning on the bottom three strings - its E(low)AD. So it makes sense to me that if I use the 6th, 5th and 4th strings from a standard set (I usually use 12s for CBGs), the tensions are going to about be right to give me my low open E chord. Tune the 6th as standard to E and the 5th and 4th can comfortably be tensioned up two semi tones to give me the B and higher E.

So using this principle I would use the 5th 4th and 3rd strings (ADG) from a 12 guage set to give me an open A which would be AEA. I just need to tune up two semi tones on the 4th(D) and 3rd(G) to get me there. This tuning up on some strings is the main reason I make my guitars with a short scale. Using standard strings on a short scale guitar means they need slightly lower tension to put them in true concert pitch, so that gives me some scope for over tensioning them slightly to get my open chords.

Lastly, a word about the necks. If you were buying a standard guitar, one of your main priorities would be making sure the neck was dead straight. These CBGs don't have anything as sophisticated as struss rods and so you will see there is often a substantial bend in the necks. Also that the action is incredibly high. This is perfectly fine for slide playing, in fact it's an advantage so don't be concerned about it. I use hard woods such as oak, mahogany, beech etc so there is no danger of them snapping under normal use.

Hope you found this helpful. Next post will be slide playing basics.

another UK cigar box guitar builder

This is one of the rewarding bonuses I get from doing this stuff. A few weeks ago I had an email from a guy named Rich. He'd seen the blog and felt inspired to build a CBG himself and asked for some advice. Here's an extract of his email -

'Just found your website after trawling the net to buy a cbg. Could only come up with Hawaiian type guitars then I found your blog - wow that blew me away......... then I discovered seasick steve and decided I needed a cbg in my life'

He had a good look at my older posts about building, and set to straight away. He kept me informed of his progress and has sent me these two pictures of his first CBG. What a great job he's done. Look at the neat construction work - he's an engineer. He ends by saying he just needs to learn to play it now.

Nice to know he's in the England too - another CBG nut to add to our growing UK tribe. Keep at it Rich and we look forward to seeing you play this baby on Youtube one day.

two new CBGs on the way

I've been busy building again. I've got two new ones half finished. I'm developing the distressed theme I started with the last one. One box (Sun Dried) has a lacquer which tends to chip easily. So I capitalised on it and rubbed down the edges and corners to give it that nice 'worn in' look. It has a dark stained neck with a red headstock to echo the colour of the label which is scarlet red. It's looking great and it will be hard to let this one go too. The other box is a white paper covered Hoyo de Monterrey. It has green ends so I'm painting the neck green with a white fretboard. I'll rub it down to give it the worn in look too. I'll post photos later when they are done.

Update - they're done and I'm pretty damn pleased with the. Photos soon

which one of us is crazy

The other day I called at an old fashioned tobacconist to see if they had any cigar boxes. I always feel slightly embarassed for some reason. The usual customers are often connoisseurs of fine tobacco. They are there to buy some of it, and me - I want empty boxes. I usually tell the assistant what I want them for. I think it gives me a bit more street cred and lessens the embarassment. On the other hand, I wonder if they think I'm some kind of crazy nut.

There was a customer already in there, closely examining some Monte Christos. He was taking each one out of it's aluminium tube and carefully squeezing and sniffing at it. The assistant was a friendly young man and started dealing with me whilst the other guy continued with his minute examination. These cigars were obviously something special.

I was looking at various empties and commented that I liked the Bolivar one because it had 'a nice design' on the front. This brought a reaction from the other customer that I could only describe as a snigger. Maybe he hadn't heard my first conversation and thought I was choosing cigars based on the box design. Either way it made me feel a little stupid. He closed the deal agreeing to buy four Montes, handed the assistant £60 and seemed very happy with his purchase. I bought five empty boxes for £5 and walked out of the shop, also happy.

Now the question is this. Which of us is the crazy one and who deserved the snigger? He spent £60 and will stick some rolled up leaves between his lips and set fire to them. I spent £5 and will make five guitars.

I want to add that I don't wish to offend cigar smokers, but you have to admit, it's a weird thing to be doing if you think about it. The young man who served me, was really friendly and helpful and I did promise to add the link to his shop so here it is http://www.thebackyshop.co.uk/

distressed cigar box guitar

Here it is, the latest creation - my artificially distressed CBG. It's tuned to open A. The volume is low when played acoustically but when amplified it's a little belter! I used the bowl part of an old spoon to make a jack socket plate.

smojo logo stamp

I've been trying to find a better way of adding my smojo logo to the headstocks. In the past I hand wrote it with a woodburning tool. Not easy to get it looking professional, not easy to control.

I'd been discussing it with my CBG buddy Mark and the idea of using some sort of stamp. So he has kindly made me a small rubber stamp, based on the new logo type I am using now. It's a little beauty. I tried it on my latest build using some white undercoat. I probably applied a little too much pressure and the paint bled out around the typeface - but I like it. Take a look.