Monday, March 05, 2012

guitar build session 9

Missed another week but last wednesday I was back in the workshop with Martin my luthier/tutor. More neck work. A slight radius was sanded on the fretboard surface. Next, the frets. Starting at the body end of the neck I cut pieces of fretwire allowing a couple of mm overhang. The pre-slotted slots were gently cleaned of sawdust with a fine saw blade. The fretwire was gentyl presses into the slot. Using a small hammer head as a sort of punch, with masking tape to cushion it, using a mallet, the frets were tapped into place starting at one end and working across the face to the other end then the surplus snipped off. The ends of the frets are prevented from springing up with a drop of superglue on the them which sort of gets sucked into the slot. The hammer head was used to apply pressure for about 30 seconds until the glue had set. When all fitted, a file was used to smooth the ends flush with the neck edge. Then running the file lengthways at an angle, a bevel was put on them. The rest of the session was used to further shape the back of the headstock. Photos to come later.

No comments: